Download Model 500 - Southeastern Automation

Transcript
MODEL 500
JUN 2 0 0 5
(b)
Observe the same recommendations for minimum clearance: 16 inches (41 cm) in
front enclosure opening and access, and 15 inches (38 cm) at the rear and left side for
case removal.
(c)
Refer to drawing CE-23878 in the Analyzer drawings addendum of this manual.
(4)
Ensure that exposure to radio frequency (RF) interference is minimal.
3.2.3
Unpacking the Unit
1
Observe Precautions and W arnings
2
Plan Site Location
3
Obtain Supplies and Tools
4
Install Analyzer W iring
»
Observe the following checklist for unpacking the unit and inspecting for damage:
(1)
(2)
Unpack the equipment:
(a)
Model 500 series Analyzer
(b)
GC Controller
Ensure that all documentation and software are included:
(a)
This manual, the Model 500 Gas Chromatographs Hardware Reference Manual, P/N
3-9000-537.
(b)
The software manual, MON2000 Software for Gas Chromatographs User Manual,
P/N 3-9000-522.
(c)
CD(s) with the MON2000 software program and GC Applications.
INSTALLATION AND SETUP
3-15