Download CP6000 - Kontron

CP6000
CP6000-EXT-SATA
B.
CP6000-EXT-SATA
B.1
Overview
The CP6000-EXT-SATA module (order no. CP6000-MK2.5SATA) has been designed for use
with the CP6000 6U CompactPCI board from Kontron Modular Computers and enables the
user to connect an onboard 2.5" Serial ATA hard disk to the CP6000.
B.2
Technical Specifications
Table B-1: CP6000-EXT-SATA Module Main Specifications
SPECIFICATIONS
Board-to-Board Connectors
Two 12-pin, male, board-to-board connectors, J1 and J3
Serial ATA Connector
One 22-pin Serial ATA connector, J2
Power Consumption
3.3 V or 5 V, depending on the hard disk
General
Current 2.5” Serial ATA HDDs do not use 3.3 V.
B.3
Temperature Range
Operating temp.:
Storage temp.:
0°C to +60°C
-55°C to +85°C
Climatic Humidity
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions
54 mm x 27.5 mm
Board Weight
ca. 50 grams (without hard disk)
CP6000-EXT-SATA Module Functional Block Diagram
Figure B-1: CP6000-EXT-SATA Module Functional Block Diagram
SATA Connectivity
27942.05.UG.VC.051020/172758
J2 (CP6000-EXT-SATA)
2.5” HDD
ID 27942, Rev. 05
SATA Signals
Power
J3 (CP6000-EXT-SATA)
J30 (CP6000)
J1 (CP6000-EXT-SATA)
J31 (CP6000)
© 2005 Kontron Modular Computers GmbH
Page B - 3
PRELIMINARY
Interfaces
CP6000-EXT-SATA