Download Model 5014i - User Manual
Transcript
C-Link Protocol Commands Datalogging Send: Receive: set malloc lrec 10 set malloc lrec 10 ok no of lrec no of srec These commands report the number of lrec and srecs stored memory. The following example shows that 50 lrecs have been stored in the memory. Send: Receive: no of lrec no of lrec 50 recs sp field number This command reports the variable number and name stored at the index in the scratch pad list. The scratch pad is a temporary memory area which is used to set up lists of selections for lrec, srec, or streaming data items. The user can copy any of these lists to the scratch pad, modify individual elements in the list, then save the scratch pad back to the original list. The following example shows that field 1 in the scratch pad is set to index number 3, which is for the variable PM concentration pressure. Send: Receive: sp field 1 sp field 1 3 PM set sp field number value number = 1-32 for lrec and srec lists, 1-8 for streaming data lists This command sets the scratch pad field number (item number in scratch pad list) to value, where value is the index number of a variable in the analog output variable list. Available variables and their corresponding index numbers may be obtained using the command “list var aout”. The “set sp field” command is used to create a list of variables which can then be transferred into the lrec, srec, or streaming data lists, using the “set copy sp to lrec”, “set copy sp to srec”, or “set copy sp to stream” commands. Send: Receive: set sp field 1 34 set sp field 1 34 ok stream per This command reports the current time interval in seconds for streaming data. The following example reports the streaming period is set to 10 seconds. Send: Receive: B-26 Model 5014i Beta Instruction Manual stream per stream per 10 sec Thermo Fisher Scientific