Download MLS 608 D SA - Extron Electronics
Transcript
Audio and RS-232 Connections NOTES: When wiring the connectors for the ports listed below: • DO NOT tin the wires. • Bare the wires to a maximum length of 3/16 inch (5 mm) only. i Audio inputs 1-3 and 5-8 — These 5-pole captive screw connectors support analog, balanced or unbalanced, stereo audio as three line level inputs (1-3) and four line level analog stereo inputs (5-8). Audio from the HDMI inputs 5-8 can be de-embeded from the HDMI source. This allows the user to choose to select audio either from the HDMI inputs or the analog audio from these four captive screw inputs. Once an audio source is selected, the unselected source is disabled. The default selection is audio from the HDMI inputs. Connect audio sources to these 5-pole, captive screw connectors. Wire the connector for line level analog stereo as shown below. Tip Ring Sleeve (s) Tip Ring R Tip Sleeve L Tip Sleeve Balanced Input Unbalanced Input j MIC/Line level audio inputs 1-2 — These two 3-pole, captive screw connectors are microphone or line level inputs for balanced or unbalanced mono audio. They also have +48 V phantom power support and two rear panel LEDs that indicate when phantom power is activated. The phantom power can be activated through DSP Configurator. See the DSP Configurator Help File "Mic/Line Input Gain" section, for the method of enabling and disabling phantom power. Connect microphone or line level audio inputs to these 3-pole, captive screw connectors. Wire the connector for mono audio as shown below. Tip Tip Ring Sleeve Sleeve Unbalanced Mic Input Balanced Mic Input k Line level audio outputs 1-2 — Connect audio output devices to these 5-pole, captive screw connectors. Wire the connectors for line level analog stereo output as shown below. CAUTION For unbalanced audio, connect the sleeve(s) to the ground contact. DO NOT connect the sleeve(s) to the negative (-) contacts. Unbalanced Output Tip Ring Sleeve(s) Tip Ring AUDIO L R AUDIO L R Tip NO Ground Here Sleeve(s) Tip NO Ground Here Balanced Output MLS 608 D Series • Rear Panel Connections 14