Download Multigrow User Manual

Multigrow User Guide
Enable, instead of a checkbox (annotation B in the diagram above), there is a dropdown list. This can be set to one of:
• "None" - disables alerting for this reading
• "Single" - a single set of alert limits for all time periods
• "Per Time Period" - a set of alert limits for each configured time period (as with the other alerts)
Environment
State Alarms
State alarms are alarm alerts generated by contacts closing on an attached device. These can be setup to monitor anything that can send an electronic
signal to close the contacts on the device, like smoke and heat detectors for example.
Annotation
Name
Description
A
Add button
Adds another state alarm
B
Delete button
Deletes a state alarm
C
Alarm name
The name that will be displayed in the alert logs
D
Current state
The current state of the contact closure
E
Current alarm state
Yes if the alarm is currently active, No if not
F
Source device
The device whose contact closure you want to monitor
G
Contact Closure
level
Which state to raise the alarm for (e.g. setting to high while the current state is high would raise an alert immediately)
H
Time periods
The time periods which you want this alarm to be enabled for
Ver 1.00
443
© 2014 Autogrow Systems Ltd