1
Download Multigrow User Manual
Transcript
Multigrow User Guide General The general box displays the same settings as the overview box for the water source. See above for more information of these settings. Tank IF the water source is a Tank or a blending tank this box will be displayed here all the information for configuring a tank will be displayed. Tank Size: Size of the tank being used for batching, this is not crucial to the control of the tank as the voltage readings determine the actual tank level. This is more for user feed back of the tanks exact level. Voltage Source: The Remote EpM group the tank level sensor is being reported to. • Measure: The tank level sensor is connect to a Remote EpM under the Measure Group. • Check: The tank level sensor is connect to a Remote EpM under the Check Group. • Source: The tank level sensor is connect to a Remote EpM under the Source Group. Curr. Voltage: Current voltage on the Moist input of the sensor source selected above. Curr. Level: Current level calculated from the settings. Filled Voltage: When the tank is full enter the value being displayed under Curr. Voltage into this field. Empty Voltage: When the tank is empty enter the value being displayed under Curr. Voltage into this field. Fill Flow Alarms IF the water source is a Tank this box will be displayed. Enable: This box will enable the fill flow alarm on the system. Once ticked and saved additional options will become available. Source: This is the sensor source this particular input will get its flow readings from. Each Input has up to six different sources it can choose from. • Local: Flow source is from a sensor local to this irrigation system. • Measure: Flow source is the Measure Remote EpM sensor group. • Check: Flow source is the Check Remote EpM sensor group. • Input: Flow source is the Input Remote EpM sensor group. • Main: Flow source is from a main sensor. • Main Sensor 1: Flow source is from Main Sensor 1. Ver 1.00 410 © 2014 Autogrow Systems Ltd
