Download Administration Guide

Chapter 6 – Indexing Configuration
Dither
Dithering converts and simulates unavailable colors. When dithering is turned on, the system
combines two or more colors to approximate the unavailable color.
Horizontal Resolution
Select the horizontal dots-per-inch resolution setting to apply during the scanning process.
Vertical Resolution
Select the vertical dots-per-inch resolution setting to apply during the scanning process.
Page Size
This setting determines the default page size of the image as it is scanned.
Scan Type
This setting determines if scanning should be two-sided (duplex), one-sided (simplex), etc.
Brightness
Brightness defines a pixel's lightness value from black (darkest) to white (brightest). Select
the brightness level to be applied during the scanning process and whether it should be
applied manually or automatically. If applying the brightness manually, use the slider to
increase or decrease its amount.
Contrast
Contrast is a measure of the rate of change of brightness in an image. A high-contrast image
contains defined transitions from black to white. Select the contrast level to be applied during
the scanning process and whether it should be applied manually or automatically. If applying
the contrast manually, use the slider to increase or decrease its amount.
PaperVision® Capture Administration Guide
126