Download Administration Guide

Chapter 7 – Barcode Configuration
Starting the Scanning Process
After loading images, you can scan them to ensure the barcodes zones are being read
successfully. To start the scanning process, click the Start Scanning
icon.
Stopping the Scanning Process
To stop the scanning process, click the Stop Scanning
icon.
Removing a Single Image
To remove a single image:
1. In the Thumbnails section, select the image to delete.
2. Click the Remove Single Image
icon.
3. Click Yes to confirm the removal.
Rotating an Image 90° Counter-Clockwise
To rotate the image 90 degrees counter-clockwise, click the Rotate Image 90° CounterClockwise
icon.
Rotating an Image 90° Clockwise
To rotate the image 90 degrees clockwise, click the Rotate Image 90° Clockwise
icon.
Removing All Images
This command removes all current images from the main scanning window and from the
Thumbnails section.
To remove all images:
1. Click the Remove All Images
icon.
2. Click Yes to confirm the removals. If you have defined barcode zones prior to
clearing all images, these barcode zones are retained.
PaperVision® Capture Administration Guide
137