1
Download QnUCPU User`s Manual (Function Explanation, Program
Transcript
CHAPTER6 FUNCTIONS 1 (5) Procedures for setting/changing/clearing a remote password (a) Setting a remote password • In the project data list of GX Developer, select [Parameter] 2 [Remote pass]. Remote password setting 3 For the QnUDE(H)CPU or QJ71E71, configure setting in "Detail". 4 5 6 7 Figure 6.83 Remote password settings screen 8 Table6.33 Setting items on the Remote password settings screen Item Enter a remote password. Setting range/option Four characters or less (alphanumeric characters, special symbols) • QnUDE(H)CPU Password active Model name Select a model name. Start X/Y Set the start address of the module. • QJ71E71 • QJ71C24/CMO module settings Detail - User connection No. Select user connection No. 0000H to 0FE0H Connection 1 to Connection 16 Auto open UDP port FTP transmission port (TCP/IP) System GX Developer transmission Select a valid port of the remote connection port (TCP/IP) password. - GX Developer transmission port (UDP/IP) HTTP port • Connect GX Developer to the CPU module. • Write a set remote password to the CPU module. • In multiple CPU systems, write a remote password to the control CPU of the module to which the remote password is to be set. 6 - 111 6.19 System Protection 6.19.2 Remote password Password settings Description
