1
Download GPIB Command Reference - Steven M. Anlage Research Page
Transcript
KEYt<numeric> INTEt<numeric>[PCT] NNNNNNNNNNNNNNNNNNNNNNNNNNNNN Sets the display intensity as a percent of the brightest setting. ( INTENSITY under 4Display5) Parameter <value> <value> Range Unit % 0 to 100 (simple command) 0 to 1 (SCPI command) Query Response fnumericg <new line><^END> Equivalent SCPI Command :DISPlay:BRIGhtnesst<numeric> ISOD Completes isolation calibration. The error coecients are calculated and stored. (Network analyzer only) ( ISOLATION DONE under 4Cal5; No query) NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN Equivalent SCPI Command :SENSe:CORRection:COLLect:SAVE7 ISOL NNNNNNNNNNNNNNNNNNNNNNNNNNNNN Starts the isolation calibration. (Network analyzer only) ( ISOLATION under 4Cal5; No query) Equivalent SCPI Command :SENSe:CORRection:COLLect[:ACQuire]tISOL2 KEYt<numeric> Sends the key code for a key or a softkey on the front panel. This is equivalent to actually pressing a key. See Appendix G for key codes. Parameter <numeric> Description 0 to 52 Query Response fnumericg <new line><^END> Equivalent SCPI Command :SYSTem:KEYt<numeric> Example OUTPUT @Hp4396;"KEY 8" Equivalent to pressing 4Chan 15. Commands Reference 2-55
