1
Download Robotics user manual
Transcript
4 How to simulate programs 4.2 Detecting collisions Continued 2 In the Near miss box, specify the maximum distance between the objects to be considered a near-miss and then click Apply. Setting logging options In addition to the graphical display of collisions, you can also log the collisions to the output window or a separate log file: 1 On the File menu, click Options.and under Simulation, click Collision. 2 On the Navigation pane to the left, select Simulation: Collision. 3 On the Collision page to the right, select Log collisions to Output window check box. The collision log is displayed in the output window. 4 On the Collision page to the right, select Log collisions to file check box and enter the name and path to the log file in the box. A separate file for logging collisions is created below the check box. 3HAC032104-001 Revision: G 143 © Copyright 2008-2011 ABB. All rights reserved.
