Download Robotics user manual
Transcript
2 How to build stations 2.2.2 Two robot systems having different task frame positions Continued 5 Modify the task frame position of the conveyor mechanism. See Set Task Frames on page 411. NOTE! Before modifying the task frame, make a note of the current conveyor position in world coordinates. After modifying the task frame, move the conveyor back to the position it was before modifying the task frame. 6 Modify the baseframe positions of robot (system 2). Repeat step 2 to modify the baseframe position of the robot (system 2) a Move the mechanical unit (robot) to its new location. b See Updating the baseframe position on page 412 to update the baseframe position of the robot. c Repeat steps 1 and 2 to modify the baseframe position of the robot. d In the System Configuration window, click OK. When asked if you want to restart the system, answer Yes. Close the System Configuration window. 7 Modify the baseframe position of the conveyor (system 2). a In the Offline browser, click System Configuration to bring up a dialog box for system 2. b Select the conveyor in the hierarchical tree. The BaseFrame property list for the conveyor is now displayed. c Select the option Use Current Station Values to update the baseframe value of the robot in the controller. d Deselect the option Check BaseFrame on Startup. e In the System Configuration window, click OK. When asked if you want to restart the system, answer Yes. NOTE! By deselecting the option Check BaseFrame on Startup, RobotStudio will not compare the BaseFrame values in the station and the controller every time the controller is started. This avoids repositioning the conveyor library. NOTE! If the two robot systems use the same part on the conveyor, the relation between the part and the two conveyor workobjects should be the same. 78 3HAC032104-001 Revision: G © Copyright 2008-2011 ABB. All rights reserved.
Related documents
Comfort PRL-series Unit installation
Excalibur 901 User manual
Manuale completo ROBOTSTUDIO
Concepção de um Sistema Robótico para Prototipagem Rápida por
ABB RPB 320 Product manual
Advantech PCI-1720U Specifications
same in room - 5axes
Conceção e simulação de uma célula robótica para operações de
Hardware Manual for 5000 Series
IRC5-Rapid Reference..
RAPID reference manual
PREMIO ESTATAL DE INNOVACIÓN 2006 CONSEJO ESTATAL DE