Download Robotics user manual

Transcript
2 How to build stations
2.2.1 Two robot systems sharing the same task frame position
Continued
NOTE! Now both systems (system 1 and system 2) use the same conveyor
library and the library previously referenced by system 2 is removed from
the station.
5 Modify the baseframe positions of robot (system 2).
a Move the mechanical unit (robot) to its new location.
b See Updating the baseframe position on page 412to update the
baseframe position of the robot.
c Repeat steps 1 and 2 to modify the baseframe position of the robot.
d In the System Configuration window, click OK. When asked if you
want to restart the system, answer Yes. Close the System
Configuration window.
76
3HAC032104-001 Revision: G
© Copyright 2008-2011 ABB. All rights reserved.