Download USER MANUAL WinSIC SOFTWARE

6) Software installation
Required configuration :
-
PC equipped with a Pentium processor (Pentium 166 or higher recommended)
Microsoft Windows 95/98/Me or Windows NT4/2000 operating system
32 Mb of RAM
about 40 Mb disk space available.
Installation procedure under Windows 95/98/Me, Windows 2000 (all versions) :
1) If the Windows default parameters have not been modified, the installation procedure should
start automatically after you insert the CD-ROM. If this is not the case, you have to execute the
"Setup.exe" program by double clicking on the CD-ROM. During the installation procedure, we
recommend that you keep the default directory ("C:\Program Files\WinSIC") in order to make a
possible maintenance easier. Depending on the Windows version, it might be necessary to
restart the computer.
2) Once the software is installed, a "WinSIC" and a "Logo Editor" shortcut should appear in the
menu "Start – Programs – WinSIC".
Installation procedure under Windows NT 4 :
The installation procedure is the same as above ; the only difference is that the pack 3 (or higher)
for Windows NT 4 must be installed. If this is not the case, you will find the service pack 6 on the
CD-ROM.
Program update for the Controller:
To update the controller, you should:
- make the controller on “boot” : Press simultaneously the keys <ALT><DEL> on the
keyboard of the controller : the message BOOT
S_E6 should appear.
- start the programme CHARGE.BAT which is in the folder CONTROLEUR in the installation
directory of winsic
broadly : C:\Program Files\winsic\controleur
NOTWINSIC15US – R00
9/53