Download USER MANUAL WinSIC SOFTWARE

2. Electrical specifications
Power supply : ..................................................................................... 85 to 260 VAC.
Power frequency : ................................................................................ 50 to 60 Hz.
Inrush start-up current for 260 VAC : ................................................. 15 A.
Overall average efficiency : ................................................................. 80 %.
Maximum power : ................................................................................ 300 W.
Available power : ................................................................................. 250 W.
Primary/Secondary insulation voltage : ............................................... 3750 VAC.
Input/ground insulation voltage : ......................................................... 1500 VAC (i<8 mA).
4) System start-up
The standard system is made of the following elements :
Marking machine,
Electronic control unit (controller),
Keyboard,
Start/Stop control handbox,
Power supply cable,
PC.
POWER CONNECTION
WARNING
ALTHOUGH IT IS PROTECTED AND MEETS THE STANDARDS REQUIREMENTS,
THIS ELECTRONIC EQUIPMENT MAY BE SENSITIVE TO EXTERNAL DISTURBANCES.
THEREFORE, IT MUST BE CONNECTED TO AN INSTALLATION WHICH COMPLIES
WITH STANDARDS AND IT MUST BE PROTECTED FROM POSSIBLE RADIATIONS.
Switch
Power Supply
Accessory
(3rd axis)
Start/Stop push
button box
Machine
PC
I/O
NOTWINSIC15US – R00
7/53