Download USER MANUAL

CA-64
SATEL
9
During normal operation, the display shows the current date and time, it can also
permanently show the keypad name. Format of the information displayed is defined by
the installer. The lower display line can be used to show the current status of selected
partitions (up to 16), the displayed symbols being as described in the Tests function.
The first character in the lower line (from left) shows the status of the lowest number
partition, selected by the installer. The following numbers show information on the
partitions in the ascending order.
The installer can activate the function of showing important technical information on the
LCD display i.e. the, so-called, ”Service message”. The displayed text can contain up to
29 characters, can be displayed either permanently, or for a specified period of time,
can be visible either to all users, or only to some of them after entering the access code.
6.2.2 Keys
16 keys (lighted similarly to the keypad screen) are located beneath the display, which
are used for:
• entering the code,
• moving along menu and selecting appropriate functions from the list,
• entering data for functions called.
The letters provided on numerical keys in CA-64KLCD-L and CA-64KLCD-S keypads
may facilitate memorization of the access code by mentally associating it with a
particular word (e.g. the code „[7][8][2][7][8]” corresponds to the word: „START”).
Special symbols in CA-64KLCD-L and CA-64KLCD-S keypads make easier associating
particular keys with the alarms, which can be activated by using the keys:
- fire,
- auxiliary,
- panic.
6.2.3 LEDs
Located at the display are 6 LEDs, which indicate current status of the system.
• ALARM (red) – continuous light informs on alarm signaling activation at this moment.
When the LED blinks, it means that, in partitions operated with this keypad alarm
signaling occurred again since the last reset of the alarm memory.
• TROUBLE (yellow) – the LED blinking informs on presence of a technical problem in
the system. Troubles, which activate this LED, are described further in this Manual
(see Description Of User Functions Æ Troubles). The LED does not light when the
LCD keypad operates in partially armed mode (at least one partition accessible for
the LCD keypad is armed) or armed mode (all partitions accessible for the LCD
keypad are armed) (service setting).
• ARMED (green) - the LED blinks when some partitions are armed and lights steadily
when all partitions operated by the keypad are armed.
• SERVICE (green) - the LED blinks when the control panel operated in the service
mode (function accessible for the user provided with the service code only).
Note: Service mode limits normal operation of the control panel. Alarms from most of
zones (except for zones of the following types: PANIC, 24H CASH MACHINE, and
24H VIBRATION) and tampering alarms are not signaled. In order to restore the
normal control panel operation mode, just exit the service mode, for the control
panel does not return to its normal operation mode automatically.
• Zones 1-64 (two green LEDs) – they are used when viewing and testing status of
zones and “expander” type modules – they indicate which group of zones (or which