Download CLS User's Guide

Setup
Test Digital Output
Use this menu to select one of the digital alarm outputs to test in the
next menu.
LOOP
PROCESS
UNITS
TEST DIGITAL
OUTPUT ? 34
ALARM SETPOINT
STATUS
OUT%
Toggle Digital Output
Use this menu to manually toggle a digital output On or Off to test it.
(You select the output to test in the previous menu.) On may be Low or
High depending on the digital output polarity you set in the Output
Polarity menu. (All outputs are set to Off when you exit Manual I/O
Test menu.)
LOOP
PROCESS
UNITS
DIGITAL OUTPUT
NUMBER 17? OFF
ALARM SETPOINT
STATUS
OUT%
Selectable values: On or Off.
Keypad Test
Use this menu to test the keypad.
LOOP
PROCESS
UNITS
KEYPAD TEST
QUIT = "NO" + "NO"
ALARM SETPOINT
STATUS
OUT%
• Press any key to test the keypad. The CLS will display the name of
the key you have pressed.
• Press No twice to advance to the next menu.
96 CLS User’s Guide