1
Download McDATA 3032 Switch User Manual
Transcript
Diagnostics 3 Does the Operational State field display a Beaconing message and the Beaconing field display an On message? YES ↓ NO Go to step 47. 46 Port beaconing is enabled. a. Consult the customer and next level of support to determine the reason port beaconing is enabled. b. Disable port beaconing: 1. At the View panel, select Operations at the left side of the panel. The Operations panel opens with the Port Beaconing page displayed. 2. Click the Beaconing State check box for the port. The check mark disappears from the box and port beaconing is disabled. 3. Return to the View panel (Port Properties tab). Continue. 47 At the View panel, does the Operational State field display a Segmented message? NO ↓ YES Port segmentation is indicated. Go to step 52 to obtain event codes. If no event codes are found, go to MAP 0700: Fabric, ISL, and Segmented Port Problem Determination on page 3-92. 48 At the View panel, does the Operational State field display a message indicating a link incident or port problem? NO ↓ YES A port problem is indicated. Go to step 52 to obtain event codes. If no event codes are found, go to MAP 0600: Port Failure and Link Incident Analysis on page 3-72. 49 Repeat step 45 through step 48 for each remaining port. MAP 0000: Start MAP 3-25
