Download Microchip Technology Zena User`s guide
Transcript
MPLAB® IDE USER’S GUIDE Chapter 14. MPLAB IDE Operational Reference 14.1 INTRODUCTION Reference information about the operation of MPLAB IDE is discussed here. • • • • 14.2 Command-Line Options Files Used by MPLAB IDE Saved Information File Locations COMMAND-LINE OPTIONS MPLAB IDE can be invoked through the command-line interface as follows: mplab [file] [/option] file = workspace.mcw Open the workspace workspace.mcw in MPLAB IDE. Any projects contained in the workspace will be opened also. option = nosplash Do not display splash screen on program launch 14.3 FILES USED BY MPLAB IDE MPLAB IDE generates several files and uses the generated files of its supported tools. The default extensions of these files are listed in Table 14-1. TABLE 14-1: MPLAB® IDE DEFAULT EXTENSIONS Extension Definition a Archive (library) file – MPLAB LIB30 asm Assembly language source file – MPASM™ assembler c C source file – MPLAB C18/C30 chm Compiled HTML Help file cod File containing symbolic information and object code – MPASM assembler cof File containing symbolic information and object code – MPLINK™ linker elf File containing symbolic information and object code – MPLAB LINK30 err Error file – assembler/compiler evt Event file – MPLAB ICE 2000 exe Program/utility file fsti File stimulus file – MPLAB SIM for PIC17 MCUs gld Linker script file – MPLAB LINK30 h C include file – MPLAB C18/C30 hex Machine code in hex(adecimal) format file Note: Not all hex files are the same. Depending on how they are generated, one hex file’s content may differ from another, i.e., a hex file generated from a project may differ from a hex file generated from a File>Export. inc Assembly language include file – MPASM assembler/MPLAB ASM30 © 2006 Microchip Technology Inc. DS51519B-page 183