Download Axis 7100 Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Graphical User Interface
•
Video Workspace: Displays a real-time video image of the Workpiece
on the Cutting Chuck. The Video Workspace also displays the Cut Map
and the Wizards that guide the User through selected procedures.
•
Programming Workspace: Enables the User to create and edit
Recipes assigned to Workpieces.
•
Workbook Workspace: Displays a set of operations and parameters
used to prepare the System for operation. There are two Workbooks, as
follows:
•
Setup & Diagnostics Workbook
•
Calibration Workbook
•
Load Monitor Workspace: Displays load monitoring statistics.
•
Blade Info/Override/Dressing Workspace: Displays the Blade
parameters and the set of operations and parameters used for Blade
Dressing.
The Workspace displayed in the main window is selected by clicking one of
the following buttons from the toolbar:
Main
Video
Programming
Workbook
Load
Monitoring
Override/
Dressing
Blade Info
MultiLanguage
Support
Figure 2-15: Workspace Buttons
P/N 97100-9002-000-14
Ver 06/05
2.2-13