Download Agilent Technologies B1500A Technical data

Programming Examples
Using Program Memory
Table 3-30
Program Memory Programming Example 2
session.WriteString("VAR0,0," & t(0) & vbLf)
session.WriteString("VAR0,1," & t(1) & vbLf)
session.WriteString("VAR0,2," & t(2) & vbLf)
session.WriteString("VAR0,3," & t(3) & vbLf)
session.WriteString("VAR0,4,0" & vbLf)
session.WriteString("VAR0,5,0" & vbLf)
session.WriteString("VAR1,0,1" & vbLf)
session.WriteString("VAR1,1,0.8" & vbLf)
session.WriteString("VAR1,2,0.1" & vbLf)
session.WriteString("VAR1,3,0.05" & vbLf)
session.WriteString("VAR1,4,0" & vbLf)
session.WriteString("VAR1,5,0.1" & vbLf)
session.WriteString("VAR1,6,0.01" & vbLf)
session.WriteString("VAR1,7,0.02" & vbLf)
'%I0=t(0)
'%I1=t(1)
'%I2=t(2)
'%I3=t(3)
'%I4=mrng
'%I5=orng
'%R0=vd
'%R1=vg
'%R2=idcomp
'%R3=igcomp
'%R4=v0
'%R5=hold
'%R6=width
'%R7=period
’1
Dim mem As Integer = 1
session.WriteString("ST" & mem & vbLf)
session.WriteString("DV %I3,0,0,0.1" & vbLf)
session.WriteString("DV %I2,0,0,0.1" & vbLf)
session.WriteString("DV %I1,%I5,%R1,%R3" & vbLf)
session.WriteString("DV %I0,%I5,%R0,%R2" & vbLf)
session.WriteString("TI %I0,%I4" & vbLf)
session.WriteString("END" & vbLf)
display_mem(session, mem)
’16
mem = 2
session.WriteString("ST" & mem & vbLf)
session.WriteString("PT %R5,%R6,%R7" & vbLf)
session.WriteString("DV %I3,0,0,0.1" & vbLf)
session.WriteString("DV %I2,0,0,0.1" & vbLf)
session.WriteString("PV %I1,%I5,%R4,%R1,%R3" & vbLf)
session.WriteString("DV %I0,%I5,%R0,%R2" & vbLf)
session.WriteString("MM3,%I0" & vbLf)
session.WriteString("RI %I0,%I4" & vbLf)
session.WriteString("XE" & vbLf)
session.WriteString("END" & vbLf)
display_mem(session, mem)
’26
’37
Line
Description
1 to 14
Declares variables used to set measurement conditions and sets the value. To run the
program, replace the code with the lines 12 to 15 of the program shown in Table 3-29.
16 to 24
Stores program in the internal memory 1, and displays it on the console window. To run
the program, replace the code with the lines 17 to 25 of the program shown in Table
3-29.
26 to 37
Stores program in the internal memory 2, and displays it on the console window. To run
the program, replace the code with the lines 27 to 38 of the program shown in Table
3-29.
3-116
Agilent B1500A/B1505A Programming Guide, Edition 11