1
Download Agilent Technologies B1500A Technical data
Transcript
Command Reference Command Parameters The parameters used by several commands are explained in this section. NOTE • Channel Number • Measurement Ranging Type • Output Ranging Type • HR/MP/HPSMU Source Setup Parameters • MC/HC/DHCSMU Source Setup Parameters • HVMCU Source Setup Parameters • HVSMU Source Setup Parameters • UHCU Source Setup Parameters • UHVU Source Setup Parameters • MFCMU Measurement Parameters and Setup Parameters Command Parameters In this section, the command parameters are put in italics such as chnum. NOTE Slot Numbers Agilent B1500 provides ten module slots. And the slot numbers 1 to 10 have been assigned from the bottom slot to the top slot sequentially. NOTE Number of Channels in a Module and Subchannel Numbers Agilent B1500 plug-in modules have one or two channels. The subchannel number is always 1 for one-channel modules (SMU and MFCMU). And the subchannel number is 1 or 2 for two-channel modules. For example, the subchannel number 1 is assigned to the SPGU Output 1, and 2 is assigned to the SPGU Output 2. Agilent B1500A/B1505A Programming Guide, Edition 11 4-15
