Download Alpha 1000A Specifications
Transcript
Table 6-5 SCSI IDs for Dual-Controller Configuration SCSI Device SCSI ID Bus A CDROM drive 4 Tape drive 5 Bus B Slot 0 0 Slot 1 1 Slot 2 2 Slot 3 3 Slot 4 4 Slot 5 5 Slot 6 6 Dual-Controller, Split-Backplane Configuration In the dual-controller configuration shown in Figure 6-9, the seven StorageWorks devices are divided between the on-board, 68-pin wide SCSI controller and a PCI or EISA SCSI option controller adapter. Bus A includes the CDROM drive and the tape drive, if one is installed. Bus A and bus B are each terminated by an external terminator. Table 6-6 shows the SCSI ID settings for this configuration. The features of this configuration are listed below: Caution: Avoid bending the SCSI cable when folding it. AlphaServer 1000A Owner's Guide Configuring • 6-33