Download Cabletron Systems MT8 Specifications

Cabletron Ethernet Hub Alarms and Events
Table 7-1.
Events and Alarms (Continued)
Event Message
Probable Cause Message
00010621
00010621
User defined broadcast
threshold, {v} broadcast packets
within {v} seconds, exceeded on
the board in slot {v} of {v}
(name - {v}).
Board Broadcast Threshold
Exceeded
00010622
00010622
User defined broadcast
threshold, {v} broadcast packets
within {v} seconds, exceeded on
port {v} of the board in slot
{v} of {v} (name - {v}).
Port Broadcast Threshold
Exceeded
00010625
00010625
Network configuration changes
reported by {v} (name - {v}).
{v} (name - {v} status is now
{v} (Instance ID {v}).
Not Applicable.
00010626
00010626
Device configuration change
reported by {v} (name - {v}).
Acquired database of {v} (name {v}) is full.
Not Applicable.
00010639
00010639
Environment Temperature Warm
condition at slot {I 1}
(Instance ID {0 2}) has been
detected by {v} (name - {v}).
This device detects that the
temperature within the device
has reached a WARM condition.
0001063a
0001063a
ENVIRONMENT TEMPERATURE HOT
condition at slot {I 1}
(Instance ID {0 2}), has been
detected by {v} (name - {v}).
This device detects that the
temperature within the device
has reached a HOT condition.
0001063b
0001063b
Environment Voltage Low
condition has been detected by
power supply in slot {I 1}
(Instance ID {0 2}) of {v} (name
- {v}).
The device detects that its
power supply voltage is low.
Event and Alarm Messages
7-8
This trap will be generated when
the broadcast (packets per time
interval) has been exceeded for
the given board.
This trap will be generated when
the broadcast (packets per time
interval) has been exceeded for
the given port.
Cabletron Ethernet Hubs
Management Module Guide