Download onlinecomponents.com

Product Groups
2.7
2.7.1
INTERBUS S-Line
Product Range
m
For detailed description, please refer to "INTERBUS S-Line as Part of
the INTERBUS Loop System"on page 1-17.
Digital S-Line Modules
ne
2.7.2
nt
s.
co
The INTERBUS S-Line modules can be integrated in INTERBUS Loop 2.
They can especially be used when only little space is available on the
machine.
The following modules are available:
on
l
Connections
–
Module with eight digital outputs
–
Module with four digital outputs, each with a load capacity of 2 A
–
Module with four digital inputs and four digital outputs
–
Module with four illuminated pushbuttons
om
po
Module with eight digital inputs
For the housing dimensions, please refer to "Dimensions of the S-Line
Modules"on page 3-13.
in
ec
Housing
–
INTERBUS Loop 2 is connected to these modules using M12 connectors.
The incoming and the outgoing bus is connected to these M12 connectors.
In order to integrate the S-Line modules in a Loop 2 system an
intermediate station (twin box, see page 2-18) is necessary to adapt
Loop 2 to Loop 2 M12.
From a Loop 2 branch terminal the S-Line modules can also be operated
via Loop 2 M12 cables only. For this an intermediate station (Y connector,
see page 2-21, or ADAP box, see page 2-24) is also required.
The digital output module with four outputs
(IB L2-M BOX 24 DO 4/4 M8-2A) provides a M12 connection for the
actuator supply. For the other modules with outputs the actuator supply can
5796C
2-15