Download Logic Pro 9 Control Surfaces Support

Control
Modifier
Assignment
NULL
Modifier for NULL mode. NULL mode allows you
to update the fader positions to match the actual
volume (shown in Logic Pro).
Data wheel
AUX 1 LED on: controls the Send 1 Level of the
selected channel.
AUX 2 LED on: controls the Send 2 Level of the
selected channel.
AUX 3 LED on: controls the Send 3 Level of the
selected channel.
AUX 4 LED on: controls the Send 4 Level of the
selected channel.
F3 LED on: data wheel is in Scrub mode.
None of the above is lit: data wheel is in Transport
mode, and moves the playhead in one-bar
increments.
ASGN
Sets currently selected channel’s output.
Tascam US-428 and US-224: LOCATE Section
The following table outlines the LOCATE controls and their assignments:
Control
Assignment
<< LOCATE
Moves playhead to previous marker position.
LOCATE >>
Moves playhead to next marker position.
SET
Creates a new marker at the current playhead position.
Tascam US-428 and US-224: BANK Section
The following table outlines the BANK controls and their assignments:
Control
Assignment
< BANK
Shifts fader bank left by one bank. (A bank is a group of channels.)
The LED is lit if the leftmost fader bank has not been reached.
BANK >
Shifts fader bank right by one bank. The LED is lit if the rightmost
fader bank has not been reached.
Tascam US-428 and US-224: Transport Section
The following table outlines the transport controls and their assignments:
246
Control
Assignment
REW
Moves the playhead backward by one bar.
F FWD
Moves the playhead forward by one bar.
STOP
Stops playback.
PLAY
Starts playback.
Chapter 20 Tascam US-428 and US-224