Download Logic Pro 9 Control Surfaces Support

Yamaha 02R96: ENCODER MODE Section
The following table outlines the ENCODER MODE controls and their assignments:
Control
Assignment
PAN
Assigns pan to encoders; assigns selected channel strip’s
pan/surround parameters to virtual encoders.
AUX
Assigns Send 1 level to encoders, and Send 1 to 4 levels to virtual
encoders. While held down, the channel strip display shows the
current Send 1 destination assignment.
Yamaha 02R96: FADER MODE Section
The following table outlines the FADER MODE controls and their assignments:
Control
Assignment
FADER
Enables/disables Flip mode.
AUX/MTRX
Enables/disables Flip mode.
Yamaha 02R96: EFFECT/PLUG-IN Section
The following table outlines the EFFECT/PLUG-IN controls and their assignments:
Control
Assignment
Display
Opens or closes the Sample Editor.
PLUG-INS
Switches SEL buttons and encoder buttons between normal
behavior and setting a parameter’s default value.
CHANNEL INSERTS
Determines mode of channel strip SEL buttons:
• Indicator off: SEL button used for channel strip selection
• Indicator on: SEL button used for Insert selection
2
Switches the display between “track name/parameter name” and
“parameter name/parameter value” modes.
3
Switches the bypass state of plug-in currently being edited.
4
Switches between Plug-in Assign and Plug-in Edit modes.
Parameter Up & Parameter Down
Plug-in Edit mode: shifts the parameter display to show the
next/previous page of parameter controls (usually four) for the
selected plug-in.
Chapter 22 Yamaha 02R96
261