Download Logic Pro 9 Control Surfaces Support

Yamaha 01V96: Assignment Overview
The following sections outline the assignment of Yamaha 01V96 interface elements to
Logic functions.
• Yamaha 01V96: DISPLAY ACCESS Section
• Yamaha 01V96: FADER MODE Section
• Yamaha 01V96: Basic LCD Functions
• Yamaha 01V96: LCD Modal Display Functions
• Yamaha 01V96: SELECTED CHANNEL Section
• Yamaha 01V96: Data Entry Section
• Yamaha 01V96: Channel Strips
• Yamaha 01V96: Stereo Channel Strip Section
• Yamaha 01V96: User-Defined Keys Section
Yamaha 01V96: DISPLAY ACCESS Section
The following table outlines the DISPLAY ACCESS controls and their assignments:
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that
the control has an alternate function or use while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the control name.
Control
Modifier
Assignment
*DAW AUTO STATUS
While held down in Channel Display mode, the
display shows the automation mode of the 16
channel strips in the current bank selection.
PAIR/GROUP
Enters Group Edit mode:
• When a channel strip group is selected, channel
strip membership is indicated by a lit SEL
button. Use this button to enable/disable the
channel strip’s group membership.
• Virtual encoders 1 to 4 display properties of the
currently selected group.
• Virtual encoder buttons 1 to 4 enable/disable
properties of the currently selected group.
• When INSERT/PARAM is set to PARAM, the left
and right Tab Scroll buttons scroll through the
group properties. When set to INSERT, the
buttons scroll through the groups for editing.
*DAW SHIFT/ADD
EFFECT
250
Chapter 21 Yamaha 01V96
Switches the Mixer to the Arrange view, displaying
all channel strips that correspond to tracks used
in the Arrange area, along with their signal flow.
Opens or closes the Sample Editor.