Download Logic Pro 9 Control Surfaces Support

Control
Assignment
PAN
• Assigns pan/surround control to encoders.
• In Insert Display mode, assigns pan/surround parameters of the
selected channel strip to virtual encoders.
• In Channel Display mode, assigns pan/surround parameters of
the 16 channel strips in current bank selection to virtual encoders.
AUX/MTRX
• Assigns Send level control to encoders.
• In Insert Display mode, assigns Send level parameter of the
selected channel strip to virtual encoders.
• In Channel Display mode, assigns Send level parameters of the
16 channel strips in current bank selection to virtual encoders.
ASSIGN 1
Assigns channel strip input assignment to encoders. While held
down, the channel strip display shows the current channel strip
input assignment.
ASSIGN 2
Assigns channel strip output assignment to encoders. While held
down, the channel strip display shows the current channel strip
output assignment.
ASSIGN 3
When encoders display a Send level, switches them to Send
Destination assignment mode. Press the encoder button (or ASSIGN
3 again) to confirm the assignment.
ASSIGN 4
Determines mode of channel strip SEL buttons:
• Indicator off: SEL button used for channel strip selection
• Indicator on: SEL button used for insert selection or insert bypass,
depending on MATRIX SELECT [MATRIX 4]
Yamaha DM2000: FADER MODE Section
The following table outlines the FADER MODE controls and their assignments:
Control
Assignment
FADER
Enables/disables Flip mode.
AUX/MTRX
Enables/disables Flip mode.
Yamaha DM2000: DISPLAY ACCESS Section
The following table outlines the DISPLAY ACCESS controls and their assignments:
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier
is held down. Modifier buttons that need to be assigned manually by the user are shown
with an asterisk (*) that precedes the button name.
Control
Modifier
METER
Clears overload LEDs.
*USER 4
282
Assignment
Chapter 24 Yamaha DM2000
Switches the Mixer to the All view, displaying all
channel strips that exist in your project.