Download Logic Pro 9 Control Surfaces Support

• Radikal Technologies SAC-2K: Transport Section
• Radikal Technologies SAC-2K: Channel Edit Mode
Radikal Technologies SAC-2K: LCDs and Encoders
The following table outlines the LCDs and encoder controls, and their assignments:
Control
Assignment
Left and middle LCDs
Upper row displays the channel number when in a Mixer
(multichannel) view mode. The parameter name is shown when in
a (single) Channel view mode. Lower row shows the parameter
value of the corresponding encoder (the one directly below the
display). Level meters are shown to the right.
Right LCD
Upper row displays the name of the parameter being edited with
the corresponding encoder (the one below). Lower row displays
the parameter value (assigned to the encoder below the display).
The Master Output level meter is displayed at the far right.
Encoders
Edit the corresponding parameter shown in the LCD.
Encoder push buttons
Parameters with two values (On/Off ): Switches between the two
values. Parameters that access items (plug-in selection, for example):
Confirms preselection. At other times, sets the parameter to its
default value.
Radikal Technologies SAC-2K: Channel Strips
The following table outlines the channel strip controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate function or use while the modifier is held down.
Control
Modifier
Mute/Solo
Switches Mute/Solo 1 to 8 buttons between Mute
and Solo modes. LED off: Mute/Solo buttons
switch Mute state on/off. LED on: Mute/Solo
buttons switch Solo state on/off. LED flashes:
Mute/Solo buttons switch Record Enable state
on/off.
SHIFT
206
Assignment
Sets Mute/Solo buttons to Record Enable mode.
Mute/Solo 1 to 8
Mute/Solo LED off: Enables/disables Mute; LED
displays Mute status. Mute/Solo LED on:
Enables/disables Solo; LED displays Solo status.
Mute/Solo LED flashing: Enables/disables Record
Enable; LED displays Record Enable
(armed/disarmed) status.
SELECT 1 to 8 buttons
Selects channel. Exception: In Group mode, these
buttons define group membership of the channel.
Master Select button
Switches Flip mode between Off and Duplicate.
Chapter 15 Radikal Technologies SAC-2K