Download Logic Pro 9 Control Surfaces Support

Control
Modifier
PLUG-IN
Assignment
Switches Channel view modes between:
• Plug-in Edit mode (LED on). (Plug-in window
opens.)
• Pan Edit mode (LED off ).
Plug-in window closes when Plug-in Edit mode is
exited.
SHIFT
Switches Channel view modes between:
• Instrument Edit mode (LED on). (Instrument
window opens.)
• Pan Edit mode (LED off ).
Instrument plug-in window closes when
Instrument Edit mode is exited.
PAN 1 to 12
In Pan Edit mode:
• Controls channel strip Pan/Balance (surround
angle for channels in surround mode).
In EQ/Send mode:
• 1/3/5/7: Control the Gain parameter of EQ
bands 1–4.
• 2/4/6/8: Control the Frequency parameter of
EQ bands 1–4.
• 9–12: Control Send 1–4 levels.
In Plug-in Edit mode:
• 1–10: Edits plug-in parameter.
• 11: Bypasses the plug-in.
• 12: Shifts plug-in parameter page. (A page is a
collection of parameters.)
In Instrument mode:
• 1–10: Edits Instrument parameter.
• 11: Bypasses the instrument plug-in.
• 12: Shifts Instrument parameter page.
SHIFT
In EQ/Send mode:
• 2/4/6/8: Control the Q-Factor of EQ bands 1–4.
• 9–12: Determine Send 1–4 destinations.
CH SELECT 1 to 12
Selects track/channel.
STATUS 1 to 12
In Automation mode: Switches Automation mode
between:
• Off (LED off )
• Read (green)
• Latch (orange)
• Write (red)
In Record Ready mode: Activates/deactivates
Record Enable. In Solo mode: Enables/disables
Solo. In Mute mode: Enables/disables Mute.
Chapter 17 Roland SI-24
217