Download RH850 Debug - Renesas Electronics

CubeSuite+ V2.02.00
2.3
CHAPTER 2 FUNCTIONS
Configuration of Operating Environment of the Debug Tool
This section describes the configuration of the operating environment for each debug tool.
2.3.1
Select the debug tool to use
You can configure the operating environment in the Property panel corresponding to the debug tool to use.
Therefore, first, select the debug tool to be used in a project (the debug tool to be used can be specified in the
individual main projects/subprojects).
To select or switch the debug tool, use the context menu shown by right clicking on the [RH850 Debug tool name
(Debug Tool)] node on the Project Tree panel.
Figure 2-5. Select/Switch Debug Tool to Use
Caution
The context menu items displayed differ depending on the microcontroller selected in the project.
If the Property panel is already open, click the [RH850 Debug tool name (Debug Tool)] node again. The view switches
to the Property panel of the selected debug tool.
If the Property panel is not open, double-click the above mentioned node to open the corresponding Property panel.
R20UT2866EJ0100 Rev.1.00
Feb 01, 2014
Page 13 of 353