Download Modline® 5
Transcript
Maintenance For Modline 56 sensors: occasionally, a calibration flag that operates during the Sensor internal Calibrate test may move into the viewing area during shipment. If this occurs, the viewing area will be dark and appear obstructed. This flag will be positioned correctly when power is applied to the Sensor. The Modline 5 Sensor with Laser sighting option is a Class II Laser product. When restoring a Sensor with this option back to service, follow the Cautions outlined below and the operating instructions in Section 5.11 Laser Sighting Operation, page 110 of this manual. Before turning on the Laser remotely with the DPM Digital Panel Meter Interface or other devices using RS– 485 Communications, insure there are no personnel in the path of the beam. 7.3 Servicing There are no user adjustable controls or serviceable parts within the Sensor Housing. Units must be returned to the factory for calibration and adjustments. Do not disassemble the unit! 7.4 Factory Calibration and Service Instruments are calibrated against precision laboratory standards and are "burned in" for before shipment to ensure accurate temperature measurements throughout the operating range. To preserve this accuracy, each instrument should be recalibrated periodically on a Blackbody standard. We recommend recalibration of this type on a yearly basis. There are the following methods of calibrating IRCON Modline 5 units: • • • You can have your instruments calibrated at our Service Center. An available option is calibration traceable to the National Institute of Standards and Technology (NIST). Field Service Agreements geared to your requirements are also available. Options include periodic maintenance (with provisions for guaranteed emergency service rates) and field maintenance with emergency service and parts replacement. Using the Modview Calibration software (not available for M56). This software is for sale and allows you to calibrate the Modline 52, 5G, and 5R as long as the calibration does not require a change of more than 30% of the range. You basically need a black body and while the instrument is aimed at the black body you allow the software to set the calibration of the Modline 5 Rev. L4 12/2012 129