Download Manual - StanTronic Instruments

3.5 Output Characteristics
3.5 Output Characteristics
The following charts show output voltage vs. output current of the APS-1102 (resistance load, typical
character).
Figures 3-13 and 3-14 show charts when AC is input, and Figures 3-15 and 3-16 show when DC is
Output current (Arms)/Maximum output current (Arms)  100 (%)
input.
100.0
75.0
57.7
Maximum output power = 750 VA
Output range: Rated voltage/Maximum current
---------------------------------------------------------------------
100 V range: 100 Vrms/10 Arms
200 V range: 200 Vrms/5 Arms
75.0
100.0
130 140
Output voltage (Vrms)/Rated output voltage (Vrms) × 100 (%)
Output current (Arms)/Maximum output current (Arms)  100 (%)
Figure 3-13. Output Voltage vs. Output Current Characteristics (100 V AC Input,
AC-INT)
100.0
74.1
Maximum output power = 1000 VA
Output range: Rated voltage/Maximum current
---------------------------------------------------------------------
100 V range: 100 Vrms/10 Arms
200 V range: 200 Vrms/5 Arms
100.0
135 140
Output voltage (Vrms)/Rated output voltage (Vrms) × 100 (%)
Figure 3-14. Output Voltage vs. Output Current Characteristics (200 V AC Input,
AC-INT)
3-33
APS-1102 Programmable AC/DC Power Source