1
Download R&S RTM2 User Manual
Transcript
R&S®RTM2000 Mathematics Reference for Mathematics "Addition" Op1 + Op2 Adds the two operands. "Subtraction" Op1 - Op2 Subtracts the second operand from the first operand. "Multiplication" Op1 * Op2 Multiplies the two operands. "Division" Op1 / Op2 Divides the first operand by the second operand. For small amplitudes of the second operand, the result increases quickly. If the second operand crosses zero, the result would be a range of +∞ to -∞. In this case, instead of 0V, the calculation function uses the value that the Least Significant Bit (LSB) of the second operand represents. (For an 8-bit value, for example, 1/256). You can limit the zero-crossings of the operand by using the "Maximum" operator. This limitation results in a smaller result range and a finer resolution. "Maximum" Maximum (Op1, Op2) Compares the amplitudes of both operands and displays the maximum amplitude. The sign of the result is taken from Operand1. Use this operation in combination with the "Reciprocal" or "Division" operation to limit the minimal amplitudes of an operand. Example: Operand1 is a homopolar sine signal with Vpp=3V. Operand2 is a constant value of 1V. The result is always larger than 1V or smaller than -1V. User Manual 1317.4726.02 ─ 02 107
