Download CerePlex Direct - Blackrock Microsystems

Blackrock CerePlex Direct - Instruction for Use
3.2.3
Digital Input
Digital events can be recorded through the 16-bit DB37 input port. The Pin diagram is shown
below.
Digital Input
Pin#
Description
1,18,19
2
NC
Dig In 0
3
Dig In 1
…
…
16
Dig In 14
17
Dig In 15
20-37
GND
Figure 3-4 Digital Input Pin-Out
3.3
3.3.1
CerePlex Direct Output
NeuroMotive Camera Sync
This allows synchronization between the CerePlex Direct data acquisition and taking pictures with
a NeuroMotive Camera System. The Connector is a 3 pin mini din connector. The NeuroMotive
Camera provides +3.3V on Pin 1 and Gnd on Pin 2, while the CerePlex Direct outputs a trigger on
Pin 3. The NeuroMotive Camera Sync Cable can be purchased and is BRMS PN 7690. The PinOut of the mini din connector is shown below.
Mini Din Pin #
Description
1
2
+3.3V
Gnd
3
Trigger
Figure 3-5 NeuroMotive Camera Sync Connector
3.3.2
LB-0462
3.00
Host PC
This is a Hi-Speed USB 2.0 B Connector that connects the CerePlex Direct to the Host PC.
Page 9 of 53