Download User Manual / Getting Started with SKI

SKI-Pro components, continued
GPS-Processing (optional)
Adjustment (optional)
The GPS-Processing is an option that can be accessed
via the GPS-proc Tab from within a Project window. It
allows you to process GPS observations that have been
recorded in the field to achieve WGS84 coordinates and
their relative accuracy.
Static, Rapid-Static, Stop and Go, Kinematic, Kinematic
on the Fly, and Single-Point data can be processed.
Adjustment is an option that can be accessed via the
Adjustment Tab from within a Project window. It provides
you with a powerful tool for performing a least squares
adjustment on a network of baseline vectors and
terrestrial data (directions, distances, vertical angles,
azimuths and height differences).
Additionally it enables you to perform a network
simulation based upon default observation precisions to
find out how good the design of your network is before
you measure.
The data to be processed may be selected graphically.
The computation itself is completely hidden for the user.
All selected data is processed automatically in a batch
process without the need for any user interaction.
After the GPS-Processing is completed the results can be
viewed and stored for further use in the Results-View.
A graphical user interface similar to that of View/Edit
allows you to select the points and observations to be
adjusted.
RINEX Import (optional)
RINEX Import is the optional part of the data Import tool.
It enables you to import GPS observation data collected
with third party receivers in RINEX (Receiver
INdependent EXchange) format.
An Overview of SKI-Pro
20
Getting Started with SKI-Pro-3.0.0en