1
Download C3 CMTS User Documentation
Transcript
C3 CMTS User Guide
snmp-access-list
Syntax
Syntax:[no] snmp-access-list {list-name} {deny |
permit} {any | host {host-name | ipaddr} [port port]
| subnet mask}
Creates an SNMP access list.
The parameters are:
Keyword
Description
server
Sets the address of the Network Time Protocol server
host-name
The FQDN of the host
port
Port number. Valid range: 0 to 65536
ipaddr
The host IP address
subnet
Subnet from which access to be controlled
mask
Subnet mask for this subnet
snmp-server
The snmp-server commands are designed around the SNMPv3 framework.
Internally the C3 SNMP agent exclusively processes all SNMP transactions as
SNMPv3 messages and communicates with external SNMP entities. The
SNMPv3 agent can translate incoming and outgoing SNMP messages to and
from SNMPv1, SNMPv2, and SNMPv2c.
The following commands are provided in logical rather than alphabetical order
to make understanding easier.
A view defines what part of a MIB can be accessed.
A group defines what operations can be performed on a view with a security
model.
A user is assigned to a group but user must have same security model.
A notification security model is assigned to a user.
Release 4.3, Standard
ARRIS PROPRIETARY — All Rights Reserved
10-159
