Download Intel Server System SR2625UR

Appendix C: POST Code Errors
Error Code
9287
9288
92A3
92A9
92C6
92C7
92C8
94C6
94C9
9506
95A6
95A7
95A8
9609
9641
9667
9687
96A7
96AB
96E7
0xA022
0xA027
0xA028
0xA421
0xA500
0xA501
0xA5A0
0xA5A1
0xA5A4
0xA6A0
Intel® Server System SR2625UR TPS
Error Message
Remote Console component encountered an input error.
Remote Console component encountered an output error.
Serial port component was not detected
Serial port component encountered a resource conflict error
Serial Port controller error
Serial Port component encountered an input error.
Serial Port component encountered an output error.
LPC component encountered a controller error.
LPC component encountered a resource conflict error.
ATA/ATPI component encountered a controller error.
PCI component encountered a controller error.
PCI component encountered a read error.
PCI component encountered a write error.
Unspecified software component encountered a start error.
PEI Core component encountered a load error.
PEI module component encountered an illegal software state error.
DXE core component encountered an illegal software state error.
DXE boot services driver component encountered an illegal software state error.
DXE boot services driver component encountered invalid configuration.
SMM driver component encountered an illegal software state error.
Processor component encountered a mismatch error.
Processor component encountered a low voltage error.
Processor component encountered a high voltage error.
PCI component encountered a SERR error.
ATA/ATPI ATA bus SMART not supported.
ATA/ATPI ATA SMART is disabled.
PCI Express* component encountered a PERR error.
PCI Express* component encountered a SERR error.
PCI Express* IBIST error.
DXE boot services driver Not enough memory available to shadow a legacy option ROM.
Response
No Pause
No Pause
Pause
Pause
No Pause
No Pause
No Pause
No Pause
Pause
No Pause
No Pause
No Pause
No Pause
No Pause
No Pause
Halt
Halt
Halt
No Pause
Halt
Pause
No Pause
No Pause
Halt
No Pause
No Pause
No Pause
Halt
Pause
No Pause
POST Error Beep Codes
The following table lists the POST error beep codes. Prior to system video initialization, the
BIOS uses these beep codes to inform users on error conditions. The beep code is followed by
a user-visible code on the POST Progress LEDs. For complete details, refer to the Intel®
S5500/S5520 Server Board Family BIOS External Product Specification.
Table 61. POST Error Beep Codes
Beeps
3
Error Message
Memory error
POST Progress Code
0xE8, 0xEB, 0xED,
0xEE
Description
System halted because a fatal error related to the memory
was detected.
The Integrated BMC may generate beep codes upon detection of failure conditions. Beep codes
are sounded each time the problem is discovered, such as on each power-up attempt, but are
not sounded continuously. Codes that are common across all Intel server boards and systems
that use same generation chipset are listed in the following table. Each digit in the code is
represented by a sequence of beeps whose count is equal to the digit. For complete details,
110
Enterprise Platforms and Services Division
Intel order number E46130-005