Download Intel Server System SR2625UR

Intel® Server System SR2625UR TPS
3.
Power Subsystem
Power Subsystem
The power subsystem of the system consists of an integrated Power Distribution Module (PDM),
a power module enclosure, and support for up to two 750-Watt power supply modules. The
power subsystem can be configured to support a single module in a 1+0 non-redundant
configuration, or dual modules in a 1+1 redundant power configuration. In a 1+1 configuration, a
single failed power module can be hot-swapped with the system running. Either configuration
supports up to a maximum of 750 Watts of power.
This chapter provides technical details on the operation of the power supply module and power
subsystem. For additional information, refer to the Intel® Server System SR2625 AC Power
Supply Specification and the Intel® Server System SR2625 Power Distribution Module
Specification.
3.1
Mechanical Overview
The following figures display the Power Distribution Module and the Power Supply Module
dimensions.
Figure 12. Mechanical Drawing for Power Supply Module
19
Revision 1.2
Intel order number E46130-005