1
Download CLI Command Reference Manual M5300, M6100, and M7100
Transcript
M5300, M6100, and M7100 Series ProSAFE Managed Switches no boot auto-copy-sw Use this command to disable stack firmware synchronization. Format no boot auto-copy-sw Mode Privileged EXEC boot auto-copy-sw trap (for stack firmware synchronization) Use this command to send SNMP traps related to stack firmware synchronization. Default Enabled Format boot auto-copy-sw trap Mode Privileged EXEC no boot auto-copy-sw trap Use this command to disable sending SNMP traps related to stack firmware synchronization. Format no boot auto-copy-sw trap Mode Privileged EXEC boot auto-copy-sw allow-downgrade (for stack firmware synchronization) Use this command to enable downgrading of the firmware version on the stack member if the firmware version on the manager is older than the firmware version on the member. Default Enabled Format boot auto-copy-sw allow-downgrade Mode Privileged EXEC no boot auto-copy-sw allow-downgrade Use this command to prevent downgrading of the firmware version on the stack member if the firmware version on the manager is older than the firmware version on the member. Format no boot auto-copy-sw allow-downgrade Mode Privileged EXEC Stacking Commands 62
