1
Download CLI Command Reference Manual M5300, M6100, and M7100
Transcript
M5300, M6100, and M7100 Series ProSAFE Managed Switches External LSA Checksum.......................... AS_OPAQUE LSA Count............................ AS_OPAQUE LSA Checksum......................... New LSAs Originated............................ LSAs Received.................................. LSA Count...................................... Maximum Number of LSAs......................... LSA High Water Mark............................ AS Scope LSA Flood List Length................. Retransmit List Entries........................ Maximum Number of Retransmit Entries........... Retransmit Entries High Water Mark............. NSF Helper Support............................. NSF Helper Strict LSA Checking................. Prefix-suppression............................. 0 0 0 55 82 1 24200 9 0 0 96800 1 Always Enabled Disabled show ip ospf abr This command displays the internal OSPF routing table entries to Area Border Routers (ABR). This command takes no options. Format show ip ospf abr Mode Privileged EXEC User EXEC Term Definition Type The type of the route to the destination. It can be either: • intra — Intra-area route • inter — Inter-area route Router ID Router ID of the destination. Cost Cost of using this route. Area ID The area ID of the area from which this route is learned. Next Hop Next hop toward the destination. Next Hop Intf The outgoing router interface to use when forwarding traffic to the next hop. Routing Commands 779
