Download HP 70004A - User Guide

Programming Commands (Quick Reference)
DL
DELETE
(Graphics Command) This command deletes the item or group which is
currently selected.
DM
DRAWING MODE
(Graphics Command) This command allows selection of several boolean or
arithmetic replacement rules for graphics.
DR
SET CHARACTER DIRECTION RELATIVE
(Graphics Command) This command species the direction in which characters
are lettered relative to the width and length of the window in which they
appear.
DS
DISPLAY STATUS ON/OFF
(Keyboard Command) This command selects if the keyboard device
annunciators and/or the character line box are to be displayed.
DT
DEFINE TERMINATOR
(Graphics Command) This command denes the character to be used as the
terminator of strings. Parameters of the LB (Label) command are aected.
DT
DEFINE TERMINATOR
(Keyboard Command) This command denes the character to be used as the
terminator of strings. Parameters of the FC (Fill Character Line) and ML (Menu
Load) commands are aected.
DX
SET DELTA-X
(Graphics Command) This command sets the X increment to be used in the
graph instructions GA and GR.
EG
OUTPUT ERROR MESSAGE
(Graphics Command) This command enables the user to get a text description
of an error.
EG
OUTPUT ERROR MESSAGE
(Keyboard Command) This command enables the user to get a test description
of an error.
EG
OUTPUT ERROR MESSAGE
(Storage Command) This command enables the user to get a text description of
an error.
EJ
EJECT ON/OFF
(Keyboard Command) This command enables disables the eject after a plotter
or printer dump.
ES
ERROR SCREEN
(Extention Command) This command is equivalent to selecting the report
errors utility on a display.
FC
FILL CHARACTER LINE
(Keyboard Command) This command lls the character line at the bottom of
the keyboard device with text.
FD
FILE DELETE
6-4 Programming/Remote Operation