1
Download HP 70004A - User Guide
Transcript
Step 3 (Optional). Installing HP-HIL Devices Step 3 (Optional). Installing HP-HIL Devices To connect a HP-HIL keyboard and a mouse: 1. Inspect the two ends of each HP-HIL cable to locate an end with one black dot and an end with two black dots. 2. Plug the two-dot end of the HP-HIL cable into the display's two-dot connector. The end with two black dots is always plugged into the two-dot connector of the device you are linking from, while the one dot end is always plugged into the one-dot connector of the device you are linking to. 3. Plug the one-dot end of the HP-HIL cable into the one-dot connector on the keyboard. 4. Plug the two-dot end of the HP-HIL cable that came with the HP mouse or track ball into the keyboard's two-dot connector. Note The HP mouse has only a two-dot end on its HP-HIL cable. Therefore it must be the last device in the link. Hardware Installation 1-5
