Download PDF - QuickSilver Controls, Inc.

Data Register Commands
NOTE: If this command is used in QuickControl's "Normal Mode", many of the complexities
go away. See Register File System in SilverMax User Manual for details.
Command Info:
Command
Name
Command
Type/Num
Parameters
Param
Type
Parameter Range
Register
Store Multiple
(RSM)
Program
Class D
196 (0xC4)
4 words
Number of
S16
1 to 10
Starting Data
Register
S16
NV Memory
Address
U16
Standard Register
Range
0 for indirect addressing
Max Size at NV Memory
Example:
QuickControl Example:
Store 5 data registers starting at
#20 to NV memory starting at
address 2500
@16 196 5 20 2500 (CR)
SilverMax Response:
ACK only
SilverMax Command Reference
160
Revision 4.01