Download autoMACS® Pro Separator User manual

3.1 Unpacking and installing the
autoMACS® Pro Separator
Read through the following instructions carefully before commencing
the installation procedure. Before opening the transportation box,
check for any visible external damage to the box. Check also to see
if the shock and position indicators (if present) suggest incorrect
transportation of the instrument. If there is apparent damage please
contact Technical Support for assistance (refer to section 12).
CAUTION! Due care must be taken while lifting the autoMACS® Pro
Separator. Miltenyi Biotec accepts no liability for potential injuries
and damages sustained during lifting and/or movement of the
instrument.
Note: The top compartment
holds the autoMACS Pro
Separator user manual,
the short instructions, and
various bags containing
accessories. Carefully
remove these parts.
1 Open the box and remove the top compartment of the
packaging to reveal the instrument and associated packaging.
Figure 3.1: Top compartment of the autoMACS Pro Separator box.
2 Remove boxes containing the MACS® MiniSampler and cover,
and the MACS Chill Racks. Remove the foam packaging from
both sides of the autoMACS Pro Separator.
Figure 3.2: Packing format of the autoMACS Pro Separator and accessories.
3 Place the instrument onto a stable worktop surface, e.g.,
laboratory bench. Remove the plastic bag surrounding
the instrument.
76
3 Assembly and installation