Download Operation Manual

WPG100
Potentiostat/Galvanostat User’s Manual
4-2-10 Galvanic Corrosion (Option)
Parameters
Range
Description
Run time (s)
0- 9,999,999
Experiment time
Sampling time (s)
0- 9,999,999
Data sampling time
Limit I(mA/cm^2)
-1000 - 1000
On scanning, the current value meets this value,
the the forwarding step change to reversing step
Sample Area
#######
Electrode active area
Stability(S/mV)
0 – 10,000
Stabilization condition of voltage fluctuation. If
the voltage fluctuation is less than setting value,
this experiment procedure will be finished
Density(gram/cm^3)
0-9,999,999
Equiv Wt
Init Delay(s)
Test specimen density
Equivalent weight
0- 9,999,999
Pre-treatment time(No data acquisition)
Notes:
1. When you finish input values on parameters, Save this condition as specified file for use next time.
(press “SAVE” button)
z
ID characters should be GC on file name.
z
eg) If you want your file name as GCtest.cye, then input the name as only “GCtest”(Do not
type file extension) .
2. If you want to use previously saved file, Press “LOAD” button then you can see the files list starting
GC characters.
- 53 -