Download ANSYS ICEM CFD Tutorial Manual
Transcript
Hexa Mesh Generation for an Elbow Part Figure 128: Resizing Edges—First Pair d. Similarly rescale the edges shown in Figure 129: Resizing Edges—Second Pair (p. 162) to a value of 8. Figure 129: Resizing Edges—Second Pair 4. Recompute the pre-mesh. a. Disable SOLID. Parts b. Enable Pre-Mesh and click Yes to recompute. Blocking c. SOLID Pre-Mesh Update the pre-mesh parameters. Since the edges were computed before, they did not have the sizes set. 162 ANSYS ICEM CFD 14.5 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.