1
Download ANSYS ICEM CFD Tutorial Manual
Transcript
Hexa Mesh Generation for an Elbow Part In this tutorial, you will generate a hexa mesh for a three-dimensional elbow intersected internally by a cylinder. Figure 105: Elbow Geometry This tutorial demonstrates how to do the following: • Create the material point. • Block the geometry. • Split the blocks. • Fit the computational domain to the geometry. • Create the first O-Grid. • Create the second O-Grid. • Generate the mesh. • Verify and save the mesh. Preparation Step 1: Creating a Material Point ANSYS ICEM CFD 14.5 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates. 137
