Download ANSYS ICEM CFD Tutorial Manual

Transcript
Hexa Mesh Generation for an Elbow Part
Figure 128: Resizing Edges—First Pair
d.
Similarly rescale the edges shown in Figure 129: Resizing Edges—Second Pair (p. 162) to a value of
8.
Figure 129: Resizing Edges—Second Pair
4.
Recompute the pre-mesh.
a.
Disable SOLID.
Parts
b.
Enable Pre-Mesh and click Yes to recompute.
Blocking
c.
SOLID
Pre-Mesh
Update the pre-mesh parameters.
Since the edges were computed before, they did not have the sizes set.
162
ANSYS ICEM CFD 14.5 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.